Mornington, Hobart

Mornington

Photo: Andykatib, CC0, via Wikimedia Commons

Working out of Mornington and need an auto electrician? The Mornington Industrial Estate sits right where the South Arm Highway meets the Tasman Highway, with council and roads depots among its neighbours, so vans, utes and light trucks make up much of the work.

Sponsored

Be the auto electrician this area sees first

Reach drivers, tradies and fleet operators in this part of Hobart. See sponsor spots and prices.

How can we help?

Need it fixed?

Get a quote from a local Mornington auto electrician, for anything from a flat battery to a full fit-out.

Get a quote

Buying parts?

Quality auto electrical parts from Ozautoelectrics, an established Australian supplier since 2010, dispatched through a nationwide network. For retail and trade buyers.

Shop parts

Doing it yourself?

Free step-by-step guides written for Tasmania conditions, with the parts you’ll need listed for each job.

Browse DIY guides

Auto electrician in Mornington?

Are you an auto electrical business? List your business on this site.

List your business on this site

Mornington at a glance

  • Area: Clarence (Eastern Shore), City of Clarence
  • Neighbours: Rosny Park, Bellerive, Cambridge
  • Main roads: Tasman Highway, South Arm Highway, Cambridge Road, Mornington Road, McIntyre Street, Flagstaff Gully Link
  • Typical work: amber beacon and work light wiring, inverter installs in trade vans, reversing cameras on vans, accessory wiring and fusing, 24V light truck faults

Common auto electrical jobs in Mornington

Mornington is mostly houses and an industrial estate, and the estate's depots and trade businesses drive most of the auto electrical work.

Beacons for depot vehicles

The estate is home to the Clarence council depot and a roads depot, and vehicles that work on or beside roads usually need amber beacons. A beacon is a simple circuit, but it is exposed to rain, road grime and knocks from branches. Most failures come from a corroded plug, a broken wire at the mount or a switch that has worked loose. Use sealed connectors, a dedicated fuse and a switch with a dash indicator so the driver knows it is on.

Get it done: get a quoteDo it yourself: shop LED beacons

Power tools from the van

Trades based in Mornington often want 240V in the van to charge tool batteries between jobs. An inverter can do it, but it needs heavy cable, a fuse close to the battery and ideally a second battery so the van still starts. A big inverter on the starting battery will flatten it fast. Our guide how to choose and install an inverter covers sizing. Any fixed 240V wiring must be done by a licensed electrician.

Get it done: get a quoteDo it yourself: shop inverters

Reversing cameras on vans

Many work vans have no rear window, or one blocked by shelving. Reversing out of a tight yard in the estate, or onto a busy road like Mornington Road, is much safer with a camera. Wired cameras are usually more reliable than wireless on a long van body. Mount the camera high and central, run the cable inside the body and seal every joint, because water and road spray will find any gap.

Get it done: get a quoteDo it yourself: shop reversing cameras

Adding accessories safely

Work vehicles collect extras over time: phone chargers, light bars, two-way radios, compressors. Each one connected straight to the battery without a fuse is a fire risk. Every new circuit needs a fuse rated for its cable, fitted as close to the power source as possible. Our guide where to put the fuse when wiring an accessory explains the rule and why it matters.

Get it done: get a quoteDo it yourself: shop inline fuse holders

Light trucks and 24V systems

Light and medium trucks often run on 24V, using two 12V batteries in series. That changes which globes, relays and accessories you can fit, and a 12V part on a 24V circuit will fail quickly. Charging faults can also hide when one battery is weaker than the other. Test each battery on its own as well as the pair. Our guide how to use a multimeter on a car shows the basic voltage checks.

Get it done: get a quoteDo it yourself: shop 24V globes

Mornington auto electrical questions

Can I fit a 12V beacon to my 24V truck?

Only if the beacon is rated for 24V. Many LED beacons are multi-voltage, often marked 12 to 24V, and those will work on either system. A beacon made only for 12V will usually fail quickly or burn out on 24V. Check the label or packaging before you buy, and fuse it to suit the cable size.

Why does my van battery go flat overnight?

Something is drawing current while the van is parked. Common causes are a fridge, inverter or charger left connected, a light left on in the load area, or a faulty accessory. Disconnect accessories one at a time and see if the problem stops. A second battery with a DC-DC charger keeps work loads away from the starting battery.

Local tip for Mornington

Before winter, walk around every vehicle in the yard with the lights, beacons and indicators on. Hobart's short winter days mean more driving in the dark and wet, and a faulty light is easier to fix in the estate than at the side of the Tasman Highway. Keep a small box of spare fuses, globes and connectors in each vehicle.

Auto electricians near Mornington

See the Clarence (Eastern Shore) listings for auto electricians and mobile services that cover Mornington.

Advertisement

Looking for parts in Mornington?

Fitting out a work van or ute? Beacons, inverters, reversing cameras and fuse holders are available as quality parts from Ozautoelectrics, dispatched Australia-wide.

Search auto electrical parts

Searches the full range at Ozautoelectrics, opening in a new tab. Popular: dual battery · LED light bars · trailer plugs · fuses

Nearby: Rosny Park · Bellerive · Cambridge

Auto electricians in Mornington

Own one of these businesses? Find it below and tap Claim it free to add your phone, website, hours and photos. Not listed yet? Use the claim form and we’ll add you.

Is your business missing? Tell us and we’ll add it free.

Run an auto electrical business in Mornington?